Bedspread and pillow

you want to occupy yourself crafts and a cold winter evening to remember the hot summer?Then this kit for a child's room - just what you need.

kit consists of blankets and pillows, sewn sewn from colored tissue residues by the rules is very simple in execution, but very showy techniques of patchwork - "crazy" - crazy rag (even this technique is called - "Carousel", "spiral", "labyrinth ").

Indeed, it seems that the scraps are connected randomly, forming unexpected color combinations and broken lines.However, there are certain rules of sewing patterns.

The paper used most often trim fabrics of very different forms.Sew on patches of a substrate made of cotton fabric, the size of a little more than the finished product.Without the basics you can not work, as the seams are pulled in different directions, and the product has sloppy appearance.

begin to work from the center of the product and not nametyvaya (use pins) to sew Patchwerk Patchwerk, moving clockwise (or counterclockwise).

central part of the product is filled with initially small Patchwerk and increasing fabric attached more and more large.Traditionally, central Patchwerk called "pupil" and pick up for him a piece of brightly colored cloth or with an expressive fragment pattern.

more successful patterns are obtained, in which the central part has the shape of a triangle or a polygon.

Patchwerk combine the color in different ways: for example, start to sew light, and after the passage of the next round to the next turn - darker, but in the same color scheme.Or, conversely, begin with dark and light finish.

Sometimes all patchwork coils perform contrasting color.Do it this way: each turn of Patchwerk collect on the principle of "the color of chaos."At the same time try not to interconnect Patchwerk too close in color and pattern, as they will look like one big color stain and may violate conceived composition.

sequence sewing Patchwerk on square base measuring 18 x 18 cm is shown in color graphic illustrations.

Position bright Patchwerk - "pupil" in the center of the foundations face up to its sections are not parallel to the edges of the base.Pin "pupil" pin.

second Patchwerk Pin face down to any of the parties "pupil" and Stitch, stepping back from the edge of 0.5 cm.

Remove all pins that are not etched by iron and proutyuzhte seam "on the edge".Remove the second Patchwerk on the front side and iron.

third Patchwerk Pin face down to the second Patchwerk and at the same time to the next side of the "pupil", continuing to move clockwise.Stitch, proutyuzhte seam "on the edge" and cut off the excess fabric from the second Patchwerk (if any).If you do not cut too much from the seam, then gradually formed under Patchwerk thickening, which will interfere with the ironing.

Remove third Patchwerk and iron.Each subsequent Patchwerk should completely cover sections Patchwerk to which it pritachivayut.

fourth Patchwerk stitched to the third, to the free side of the "pupil" and the second Patchwerk.Otutyuzhte and cut off the excess with a joint third Patchwerk.

Remove the fourth Patchwerk and iron.Around the "pupil" formed the first row Patchwerk.Before you sew the second row Patchwerk check, did not remain there at the seams extra tissue that needs to be cut.Note thick seams can shine through a thin transparent Patchwerk.

Fifth Patchwerk (the beginning of the second row) Stitch once to three Patchwerk first row: fourth, second and third.Sixth Patchwerk - the third to the fifth and seventh - the sixth, the third and fourth.

Continue pritachivat Patchwerk one after another, moving clockwise and increasing their size after each of the next series.Filling Patchwerk entire base trim "tails" on a par with its edges.

kit you need variegated cotton rags and a little shiny light fabric such as brocade, satin and yellow dyed fabric for lining covers and the back of the pillow.All sizes of parts are ready-without regard to the seam allowance.

veil - the size of 120 x 220 cm for the top side covered sew-based design "spiral" of 10 squares the size of 26 x 26 cm

cut satin 5 bands (A) 7 x 26 cm

4 bands (B).- 7 x 60 cm

2 bands (B) - 12.5 x 60 cm and 2 bars (D) 12.5 x 184 cm Cook also frill (D) length 550 cm (ready for use) of the width of fabric.20 cm. Focusing on the diagram, connect the first 2 short square stripes a, then sew the rectangles obtained in a rectangular fabric using strips B. to sew the short sides of the web on the band B, to the long - strip G.

Measure the finished canvas and carvebacking of the same dimensions.

Prepare frill and secure it between the front side and curtain lining.To do this, the veil and frill fold right sides, aligning slices and sour cream.Next, apply a top-lining face down and secure with pins and sostrochite on the perimeter, leaving a small hole for screwing.Remove the pins, gumption and turn the product on the front side.

Prepare for machine blanket stitch (without pads) and quilted it..

Pillow - size 38 x 68 cm to the front of the pillow cases require two squares the size of 26 x 26 cm, made design "spiralĀ»

yellow satin band: three (A) 7 x 24 cm and two (B) - 7x 68 cm

for decoration - two ready ruffles length of 38 cm and a width of 7 cm

for the reverse side - flap yellow satin.All dimensions are given without taking into account the seam allowance.

Sew squares "spiral" with stripes A (Fig. 12), and then sew the strip B - turned front side pillowcases.

In short slices fabric from the front position frills face down, align the sections pillowcases and frills, lock pins, and sour cream.

reverse side pillowcases provided with an opening for the cushion.Both parts fold inside out how their pins and prostrochite on the perimeter.Trim corners, turn the pillow right side out and insert pillow in it.

your kit ready!True, he is very smart?