Hemstitch - This openwork embroidery, performed by prodernutym threads in the fabric of the strip.In this way, decorated napkins, tablecloths, bedding and clothing.Learning this needlework easy - just be careful and learn a few simple tricks.If you choose to master the art of the frayed, start with materials with a plain weave, as they have a strong enough clearly visible thread.
For starters, you can do a napkin.The principle consists in performing openwork that the remaining yarns in the strip are grouped in bundles in a certain way to form patterns.There are several ways to group threads, depending on what openwork received the name "brush", "bar", "split";more complex - "goat", "deck" and others.
Before you start you need to determine the location for the frayed, outline width and length.Then raise the needle one transverse or longitudinal thread of the fabric and cut it with scissors.Then pull the thread, leaving intact perpendicular to the filament.In the same way the rest of the threads are rem
In the frayed, as in other types of embroidery, no nodules.To consolidate the working thread is used several ways.The simplest of these is the fact that at the beginning of the frayed perform two or three short stitches.
Hemstitch-brush - the most simple hemstitch on execution.Prepare the material, fix the working thread and display it on the front side.Then, the needle slide 3-5 strands in the band, a loop, yarn grasping and output again to the front of the needle at the point where it will start the second stitch.Tighten the loop, collecting prodernutye thread in a bundle.Then again, type an equal number of threads the needle and make a second loop.And so proceed to completion
Hemstitch-bar. It is made in the same way as a brush, but from both sides.First, follow the frayed-brush.Then, having reached the end, move the working yarn to the opposite side and collect in bundles prodernutye the same thread, to get the number of columns.This is the main view of the frayed used in other to obtain various patterns.
Hemstitch-split.This Merezhko operate on the basis of the previous two, so you first need to make a brush.It is necessary to bear in mind that you must have an even number of threads, since they will be divided into two.After completing the first row, go to the opposite side, the needle on the dial half of the beam and the adjacent half, pull the thread of their work.As a result, a pattern of bars on the frayed, as if split in half.
Hemstitch-goat. This openwork in technique is more difficult previous, it is made on the basis of the column, so initially perform this kind.Then for two columns combine together in two places with an offset of one column, that is, each loop takes one of the free beam, the other - from the previous.So to complete the work.
Hemstitch-flooring. technology frayed do this differs from the previous ones.It is easy for production and is based on the principle of interlacing yarns.Prepare material: pull the thread and treat if necessary the region.Secure the working thread a needle on the dial prodernutye yarn and thread work.Then go back in reverse: those threads that are on the needle, pass under it, the bottom - go up.Set produced by one thread (see. The way plain weave).The length of the set with each turn (or a group of turns) is changed.From this pattern is formed and frayed.