How to glue the corners of wallpaper

Often wallpaper coating materials - the most usual wall decoration.Their popularity has increased because of the affordable price and ease of pasting, but not in all areas.With smooth surfaces handle any but the issue of how to hang wallpaper in the corners, no one can prove himself as a professional.In order not to hinder the process of repair and do it more efficiently, have to resort to some tricks construction.

Features of wallpapering a straight surface in the corners of the room

Pasting the wall is not difficult, but if you reach the turn - starts hassle.How correctly to hang wallpaper in the corners?Already experienced in this business people recommend beginners to comply with several conditions:

  1. not be used to turn the whole canvas.No matter how flat it may seem - is still obtained creases and distortions, since some modern wallpaper coating materials shrink when dry.
  2. not begin to hang from the walls of the joint - it's not as smooth as at first glance.It turns out that at a time jus
    t two spoiled cloth.Instead, you need to take the level and draw a vertical line.

There are 2 ways how to hang wallpaper in the corner:

  1. Apply fabric overlap each other and make the cut at the center of the overlap.Cut parts removed.
  2. Glue one panel, the head edge of 1.5-2 cm per turn, then butted him - prepared by a second piece of material.

Preparing walls

Prior to gluing is necessary to make preparatory work:

  1. Inspect joints of the walls themselves for any irregularities.They need to align with a filler, which will dry a couple of hours.Then smooth out the surface with sandpaper, to achieve perfect smoothness.
  2. With the level of chalk, draw a straight vertical line, departing from the junction of the walls of 4-5 cm. There will be the edge of the canvas.

Step machinery performance

To begin paste, you need to prepare the necessary materials - they must all be at your fingertips.Wallcovering in the corners requires the following:

  • wallpaper coating fabric right length with a margin of a few centimeters;
  • diluted in warm water glue, suitable to the characteristics of your material;
  • roller and brush for applying the adhesive;
  • dry cloth to erase the excess adhesive;
  • brush for leveling panels;
  • line;
  • building knife;
  • stool to get up to the top of the canvas.

How to glue inside corners

Here milestones as gluing paper wall in the corners:

  1. Gluing.Carefully prepared promazhte interface structure of the walls from top to bottom, because there is stuff unstuck easily and more often.Use, where will roll, and where necessary - brush.
  2. first part.On the other side, where there is pasted material, attach the next part so that she fell for rotation about 4-5 cm, as shown in the photo.Push the edge of the sponge.Stronger push to turn the place to fix it carefully.
  3. second part.Proceed to the next wall.Knowing the width of your material, measure it on the wall so that one edge of the cloth came to a previously taped at 2-4 cm. Draw a line, check it for plumb.Having put the glue on the wall, attach the second web.Is pressed against the edge of the sponge.
  4. Trim excess.Arm yourself with a ruler and a knife construction.In the center of the overlap make a vertical section with a ruler.Gently tear off the top of the wall panel and remove the lower portion cropped.
  5. final sticking.Part of that was unfolded carefully promazhte adhesive composition and re-stick to the wall, smoothed edge and removing the excess glue.Perfect seam ready!

How to paste over external corners

projecting parts are more visible in the room, so to be performed particularly carefully.There are two options how to pokleit wallpaper:

  1. perfectly flat projection.Then just wrap the fabric over the corner joint of 3-4 cm and glue.Do not cut it, and the next stick to the usual straight surface technology.
  2. uneven walls.We'll have to use another method.

second method will not be different from the technology for internal corner joints.Here is how to hang wallpaper in the corners of the speakers:

  1. first strip with glue for corner overlap seam about 4-5 sm.
  2. Measure the width of the cloth from the ledge and back down another 5 mm, so that when one part of gluing a little stop off at another.
  3. In line make the cut in the middle of the overlap.
  4. upper part will disappear by itself, and remove the bottom, pushing back the top sheet and glue it into place.

Such methods are assumed for those materials that are glued joint to joint and prevent shrinkage deformation.Since the seam is not and will not disperse in the lumen wall.For paper materials, these methods will not work - you want to pad 0.5 cm, so the first method is used when the overlap is not cut, but simply checked for verticality with a plumb line.If abnormalities are found - hold the line and undercut unnecessary.For a more aesthetic design area often used for wallpaper.

Tutorials for wallpapering at the corners of the room

finishing materials market is replete with numerous offers.Judging by the reviews, particularly important quality corner joints, as for the repair of expensive materials chosen.As pokleit wallpaper, designed for painting with paper basis?Their width is different from the standard - it is meter.How to make a turn from vinyl models with hot embossing, which can also be washed?In addition, there are wallpapers - what about them?If you are new in this business - see useful video below, so that you can perform a quality corner joints.

How to glue the corners of vinyl wallpaper

As pokleit Non-woven wallpaper with a pattern